Fusion UV DRS 10/12 Floor-Standing UV Curing Conveyor

Name: Fusion UV DRS 10/12 Floor-Standing UV Curing Conveyor
Brand: Fusion UV

The floor-standing conveyor that takes one or two rows of Fusion UV modular curing systems — two 6-inch lamps side by side for a nominal 12-inch cure width, or 10-inch lamps in a two-row arrangement, over parts up to 4 inches high.

Talk to an Engineer ⬇ Request Datasheet

Key Benefits

Why Choose the Fusion UV DRS 10/12 Floor-Standing UV Curing Conveyor

Accepts one or two rows of Fusion UV modular microwave UV curing systems

Two 6-inch lamps (F300S or LH6 Mark II) side by side for a nominal 12-inch curing width

Two 10-inch lamps (F600S, LH10 Mark II or LH10 Mark III) in a two-row arrangement

Accommodates a variety of part geometries up to 4 inches high

Flexibility to switch between different microwave-powered UV curing systems

Lamp height, orientation, rows, cure width and belt speed all adjustable

Digital speed indicator and safety interlocks

Welded steel conveyor frame and lamp housing; built-in exhaust blower

Base cabinet accommodates two power supplies

LED heads available as a custom solution

Technical Overview

At a Glance

Nominal UV Width

254 mm (10 in.) or 305 mm (12 in.), depending on lamp system

Lamp Systems

F300S, LH6 Mark II, F600S, LH10 Mark II, LH10 Mark III (sold separately)

Lamp Configurations

10-inch: one lamp wide, one or two rows. 6-inch: two lamps wide, one or two rows

Maximum Part Height

102 mm (4 in.)

Belt Speed

Variable in five ranges: 0.3–4.6 · 1.5–22.9 · 3–45.7 · 4.6–68.6 · 10.7–152.4 m/min (1–15 · 5–75 · 10–150 · 15–225 · 35–500 fpm)

Speed Control

Variable, with digital display

Specifications

Technical Specifications

Nominal UV Width	254 mm (10 in.) or 305 mm (12 in.), depending on lamp system
Lamp Systems	F300S, LH6 Mark II, F600S, LH10 Mark II, LH10 Mark III (sold separately)
Lamp Configurations	10-inch: one lamp wide, one or two rows. 6-inch: two lamps wide, one or two rows
Maximum Part Height	102 mm (4 in.)
Belt Speed	Variable in five ranges: 0.3–4.6 · 1.5–22.9 · 3–45.7 · 4.6–68.6 · 10.7–152.4 m/min (1–15 · 5–75 · 10–150 · 15–225 · 35–500 fpm)
Speed Control	Variable, with digital display
Belt Material	Kevlar®, carbon/graphite impregnated, PTFE coating
Vacuum Hold-Down	At infeed, cure zone and outfeed
Slider Bed	Perforated aluminium sheet
Clutch Slip Limit	13.5 kg (30 lbs.) belt pull
Drive System	P.M.D.C. motor, 1/8 HP
Lamp Focus	0–101.6 mm from belt in 12.7 mm increments (53.4–154.9 mm belt to lamp face); optional continuous adjustment by hand crank
Exhaust Blower	Included and installed in the base cabinet, 1,600 cfm at 50.8 mm (2 in.) SP
Power	115 V, 50/60 Hz, 1 phase, 30 A (230 V, 50/60 Hz, 1 phase, 15 A optional)
Construction	Welded steel frame and lamp housing
Protections	Lamp and blower failure, microwave leakage, excessive power supply temperature, power imbalance, power error, power interruption, zero speed; external interlock provision
Mercury	Lamps contain mercury — manage per local, state or federal disposal laws

Documents

Brochures & Guides

BrochurePDF · opens in a new tab Range Overview BrochurePDF · opens in a new tab

Best For

Ideal Applications

Low-volume and short production runsPilot-plant and pre-production curingCure response and formulation testing at production geometrySheet, panel and small-part curingLines needing a switch between different lamp systems