Practical UV Curing SolutionsFor Real Production Challenges.
By Industry
18 of 18 application case studies
Filter by industry, or search by process, technology or product.
Photonics & Advanced Packaging
UV Curing for Next-Generation Optical Transceiver Manufacturing (400G–1.6T)
Precision UV curing for laser-to-fiber bonding, lens bonding, and optical alignment in 400G to 1.6T transceivers.
Read application →
Photonics & Advanced Packaging
UV Curing for Co-Packaged Optics Fiber Array Bonding
High-stability UV curing and dose verification for CPO fiber array bonding in AI data center infrastructure.
Read application →
Photonics & Advanced Packaging
UV Curing for Photonic Integrated Circuit Packaging
Controlled UV curing for FAU-to-PIC bonding, fiber-to-waveguide coupling, and silicon photonics packaging.
Read application →
Fiber Optic & Cable Manufacturing
UV LED Curing for Optical Fiber Draw Tower Coating
High-speed UV LED curing for primary and secondary optical fiber coatings in continuous draw tower production.
Read application →
Fiber Optic & Cable Manufacturing
UV Spot Curing for Fiber Optic Connector Termination
Repeatable UV curing for ferrule bonding and low-loss optical connector assembly.
Read application →
Photonics & Advanced Packaging
UV Curing for Advanced Semiconductor Packaging
UV curing solutions for chiplet bonding, underfill cure, photonic interconnect bonding, and UV dicing tape release.
Read application →
Electronics & PCB Assembly
UV LED Curing for Display Module OCA Bonding
Controlled low-heat UV LED curing for optically clear adhesive bonding in display module assembly.
Read application →
Electronics & PCB Assembly
UV LED Curing for OLED Panel Edge Sealing
Low-heat UV LED curing for moisture-sensitive OLED edge sealing and display encapsulation.
Read application →
Electronics & PCB Assembly
UV LED Curing for PCB Conformal Coating
Fast UV LED curing for PCB protection in electronics and automotive assembly.
Read application →
Automotive & ADAS
UV Spot Curing for ADAS Camera Module Assembly
Controlled UV curing for lens focus-lock bonding, optical filter bonding, and automotive camera sealing.
Read application →
Automotive & ADAS
UV LED Curing for Automotive LiDAR Sensor Assembly
Precision UV curing for LiDAR optical alignment, MEMS mirror bonding, and environmental sealing.
Read application →
Automotive & ADAS
UV Curing for EV Battery Manufacturing
UV curing solutions for battery sealants, structural adhesives, and cell-to-pack protection.
Read application →
Medical Device Assembly
UV Spot Curing for Cardiovascular Catheter Bonding
Controlled UV spot curing for balloon, hub, and marker bonding in cardiovascular catheter manufacturing.
Read application →
Medical Device Assembly
UV LED Curing for Hypodermic Needle & Cannula Assembly
High-speed UV LED curing for stainless steel cannula bonding and automated needle assembly.
Read application →
Medical Device Assembly
UV Curing for PCR and Microfluidic Diagnostic Card Sealing
Compact UV LED area curing for PCR cartridges, microfluidic channels, and IVD diagnostic card assembly.
Read application →
Laboratory & Research
UV Spot Curing for Photorheology on a Rotational Rheometer
Broad-spectrum UV delivered through a light guide to the rheometer plate — cure kinetics measured as they happen.
Read application →
Laboratory & Research
UV Spot Curing for Laboratory Adhesive Screening and Specimen Preparation
Screen adhesives, run dose and irradiance trials, bond test specimens — then transfer the same head, lens and dose to the line.
Read application →
Laboratory & Research
UV Radiometry for Irradiance Measurement and Process Validation
Measure the irradiance and dose the part actually receives — at the light-guide tip, at the cure site, inside the cure ring — and keep the record.
Read application →
UV Curing System Selection
How to Choose the Right UV Curing System
Start with your application, then match wavelength, curing area, intensity and production speed.
Choose your curing technology
UV Lamp Spot Curing System
2 matching products
Not sure which system fits your process?
Tell us your material, curing area, working distance and production speed. ETIA will help recommend the right UV curing system.