UV spot curing
OmniCure S1500 ProConsumables & service life
Same lamp modules and same filter cartridges as the S2000 Elite — one factory user guide covers both machines. The difference that matters here is that the S1500 Pro has no closed-loop intensity monitor and takes no R2000: the machine will not tell you its output has fallen, so measure it on a schedule you set yourself and work the optical path in order — lamp, filter, light guide.
About the system itselfLamps
S2000 Elite / S1500 Pro lamp module
The 200 W mercury lamp in its own module, with the Intelli-Lamp chip that tells the system how many hours the lamp has run. Standard for adhesive curing, Surface Cure for tack-free acrylic surfaces.
Product detailsNever interrupt the warm-up cycle: a lamp shut down mid-warm-up is not covered by the manufacturer's guarantee. The lamp contains mercury and its box says so — it is hazardous waste, and it must be disposed of under the law of the country it is in, never in general waste.
Service life
- Guaranteed
- 2,000 h
- Typical
- 4,000 h
- Operational limit
- 4,500 h
- Counted by
- Intelli-Lamp chip — the system shows estimated lifetime in hours
Source: OmniCure S2000 Elite User Guide, 035-00707
Replace it when
- The system's estimated lifetime counter is approaching zero
- Closed-loop feedback can no longer hold the set intensity
- Cure time has crept up on a process that has not otherwise changed
- The lamp will not strike, or strikes and drops out
Part numbers carried by ETIA
012-68000RS2000 Elite / S1500 Pro Lamp Module – Standard012-69000RS2000 Elite / S1500 Pro Lamp Module – Surface Cure
These part numbers are on ETIA's item master — we buy and sell them in-region. Availability on the day is confirmed on the quotation.
Optical filters
S2000 Elite / S1500 Pro filter cartridge
Genuine Excelitas cartridges. The lamp emits 250–600 nm continuously; the cartridge decides which part of that reaches the part, so choosing it is choosing the process. Seven bands, changed by the operator without tools.
Product detailsService life
The manufacturer publishes no rated life for the cartridges. They are optical glass in a hot beam path: they degrade by solarisation and by contamination, not on a clock. Judge them on measured output and on what the glass looks like.
Replace it when
- Measured irradiance has fallen although the lamp is new or its hours are low
- Visible clouding, browning or a burn mark on the glass
- A coating that is flaking or crazing at the edge
- The process moved to a different adhesive and needs a different band
Part numbers carried by ETIA
019-00390RS2000 Elite Filter 250–450 nm019-00389RS2000 Elite Filter 320–390 nm019-00391RS2000 Elite Filter 320–500 nm019-00388RS2000 Elite Filter 365 nm019-00387RS2000 Elite Filter 400–500 nm019-00392RS2000 Elite Blank Filter019-00394RS2000 Elite Custom Filter (band specified on order)019-00410RS2000 Elite optical bandpass filter kit
These part numbers are on ETIA's item master — we buy and sell them in-region. Availability on the day is confirmed on the quotation.
Light guides
Light guide
ETIA's own light guide line: liquid-filled and high-power fibre, 3, 5 and 8 mm tips, 750 to 5000 mm, single through four-leg, plus line terminations. This is the part that gets handled every shift, so it is the part that wears first.
Do not bend a light guide. Not into a curve, not into a coil, not by hanging it from its tip. There is no safe bend radius to work to — ETIA's rule is that the guide is not bent at all. Bending damage is permanent and is usually invisible from the outside: the first sign is a cure that will not pass. Route it straight, support its weight along its whole length, and cap the tip when it is off the machine.
Part numbers carried by ETIA
805-00002Liquid Light Guide (5 mm x 1000 mm)805-00004Liquid Light Guide (3 mm x 1000 mm)805-00007Liquid Light Guide (5 mm x 1500 mm)805-00009Liquid Light Guide (8 mm x 1000 mm)805-00011Liquid Light Guide (2 x 3 mm x 1000 mm)806-00005High-Power Fiber Light Guide (2 x 3 mm x 1000 mm)806-00011High-Power Fiber Light Guide (5 mm x 1000 mm)806-00012High-Power Fiber Light Guide (3 mm x 1000 mm)
These part numbers are on ETIA's item master — we buy and sell them in-region. Availability on the day is confirmed on the quotation.
Lenses & adapters
Light guide adapters & cure rings
What goes on the end of the guide to shape the beam: 90° angle adapters, adjustable collimating adapters, cure rings for 360° curing, light line assemblies.
Service life
These are glass and metal with no rated life. They come off the replacement list when the optic is scorched, fogged or chipped, or when a thread or thumb screw no longer holds position.
Replace it when
- Scorched or fogged lens face
- Chipped glass or a cracked holder
- Thumb screw or thread will not hold the set position
Part numbers carried by ETIA
810-00001Lightguide angle adapter, 90° for 3 mm LG810-00002Lightguide angle adapter, 90° for 5 mm LG810-00003Lightguide angle adapter, 90° for 8 mm LG810-000413 mm Adjustable Collimating Adapter (holder, lens, 2 thumb screws)810-000425 mm Adjustable Collimating Adapter (holder, lens, 2 thumb screws)810-000438 mm Adjustable Collimating Adapter (holder, lens, 2 thumb screws)810-00048Cure ring, slotted, 63.5 mm OD, 10 mm ID for 5 mm LG810-00049Cure ring, no-slot, 63.5 mm OD, 10 mm ID for 8 mm LG810-00050Cure ring, no-slot, 63.5 mm OD, 15 mm ID for 5 mm LG810-00013Light line assembly (50 mm × 0.1 mm)809-00083Quartz Rod Lens 3 mm (replacement for 810-00044)
These part numbers are on ETIA's item master — we buy and sell them in-region. Availability on the day is confirmed on the quotation.
Safety & cleaning
Cleaning kit, end caps & safety glasses
The parts a bench actually gets through: the light guide cleaning kit, the coloured end caps that stop a tip being chipped on the bench, and UV safety glasses for everyone standing near an open beam.
Service life
Ordered by consumption, not by interval. The one item with a real replacement rule is the safety glasses: replace them when the lens is scratched, crazed or pitted, because scratched UV eyewear does not protect reliably.
Replace it when
- Safety glasses scratched, crazed or pitted — replace, do not polish
- Cleaning tissues or swabs run out mid-shift
- An end cap lost, so a tip is sitting bare on the bench
Part numbers carried by ETIA
019-00052Light guide cleaning kit (100 lens tissues, 20 pre-saturated tissues, 20 foam swabs, 250 mL wash bottle)019-00090RProtective End Cap, 3 mm (Red)019-00091RProtective End Cap, 5 mm (Blue)019-00092RProtective End Cap, 8 mm (Green)019-01010Light guide locking kit (for dual liquid light guides)854-00001RSafety glasses, UV protection grey, CE rated014-00070RFoot Switch (audio jack)
These part numbers are on ETIA's item master — we buy and sell them in-region. Availability on the day is confirmed on the quotation.
Order by part number, or ask first
Add the part numbers you need to the inquiry list and send them in one message. If you are not sure which part has gone, tell us the model, the lamp hours and what the cure is doing — we will work it out before you buy anything.